Service Is Part Of Our Formula
Quaker Chemical Corporation
 
Chemical Products Show products by:  Industry  |  Brand Name

Concrete Floor Systems Industry
If you have any product questions or need to request an MSDS, Please click here to contact us.

Related Information

Please visit the Kemiko website for additional product information, including:

  • Product Literature
  • Technical Bulletins
  • Training Videos
  • Photo Gallery
  • Dealers
  • Trained Applicators

    Kemiko

www.kemiko.com

Applications

Kemiko Decorative Finishes

Kemiko Industrial Coatings

  • Performance Coatings for Concrete
    KEMIKO (STA CRETE)
  • 100% Solids and Water Based Epoxies
  • Waterborne Polyurethane
  • 100% Solids Polyaspartic

 

 

Products

KEMIKO® (STA CRETE®)
(Includes SS1120, SS1202, SS1202 UVR, SS1600, SS1600 LA, SS2700, SS3200, SS3300, SS3500, SS3700 and SS3800)

Abrasion & chemically resistant waterborne epoxies, polyaspartic, and 100% solids coatings. Epoxy patching compounds. Excellent leveling, high gloss finishes. Clear and pigmented. Recommended for corrosive environments, food related businesses, aircraft hangars, showrooms, maintenance bays,  warehouses and general manufacturing floors. Various products for use on wood, concrete, steel. Chemical containment areas. Quick cure primers, 100% solids epoxies & polyaspartics, and high solids polyurethanes. Most are zero or ultra low VOC.  Little to no odor.

KEMIKO®CLEAR-A-THANE SEALER

A waterborne, water viscosity, single component acrylic urethane polymer that offers low VOC, is very user friendly, and formulated to seal concrete and provide resistance against water, alkali, acids, UV Light, and staining. Kemiko Clear-A-Thane is available in both clear gloss and satin finish, and forms a non-yellowing interior/exterior protective coating.

KEMIKO® NEUTRA CLEAN

An industrial strength, high performance water base sodium metasilicate cleaner for the preparation of bare concrete for staining, sealing, and recoating. It is a water viscosity, single component product with a pleasant citrus odor that does not contain any hazardous solvents and is highly recommended as a product to neutralize the residue and clean the concrete surface after staining.

KEMIKO® STONE TONE ACID STAIN

Decorative, low maintenance acid stain with 0-VOC. Forms permanent colors on concrete. Can be applied either to interior or exterior concrete. Exterior vertical and horizontal application is possible, such as, concrete walls of buildings, retaining walls, sound barriers, driveways, and patios. Interior applications include concrete floors and counter tops in kitchens, living, dining and recreation areas, as well as, commercial applications such as hallways, walkways, stadiums, casinos, rockwork, and statuary. Available in eight colors.

REMBRANDT

Ultra-low VOC, acrylic polymer stain. Excellent adhesive strength and wear qualities. A full palette of pigments that allow the applicator to decorate concrete with an unlimited variation of artful colors. Applied to walkways, decks, commercial and residential floors, hospitals, schools, malls, restaurants, interior or exterior concrete, plaster, polymer cement, as well as, applications to wood as a stain, wash, or faux finish.

KEMIKO® STONE TONE SEALER II

A high performance waterborne, water viscosity, low VOC, single component acrylic urethane polymer sealer that is very user friendly and is designed to provide resistance to water, alkali, acids, UV light, and staining. The product is a non-yellowing concrete floor coating available in clear gloss and satin finish.

KEMIKO® REPELS

A single component 0-VOC waterborne siloxane emulsion used to improve the water resistance of Kemiko stained concrete. It is an extremely user friendly product that repels water, reduces efflorescence and frost damage while allowing the substrate to breath.

KEMIKO® STONE TONE BUFF ON WAX (Solvent Based)

This is a specially formulated buff on wax for concrete that produces a low sheen finish with very high protection and durability. Designed for interior use over Kemiko Stone Tone Stain, colored concrete, tile, brick, or any masonry surface.

KEMIKO® STONE TONE BUFF ON WAX II (Water Based)

This is a specially formulated buff on wax for concrete that produce a low sheen finish with very high protection and durability. Designed for interior use over Kemiko Stone Tone Stain, colored concrete, tile, brick, or any masonry surface.

KEMIKO® EASY SHINE WAX (Mop On)

A low-VOC, extremely user friendly, waterborne acrylic polymer, mop on wax for protecting and maintaining sealed concrete and many other finished substrates. Easy Shine repels water, reduces scuffing and marring, allows substrate to breathe, is low odor, and produces a deep rich shine.

KEMIKO® EASY STRIP

A high performance water base, concentrated wax stripper designed for easy removal of Kemiko Stone Tone and Easy Shine waxes.  Does not contain hazardous solvents.  Is biodegradable.

backtotop